Showing posts with label water profile. Show all posts
Showing posts with label water profile. Show all posts

Thursday, March 3, 2016

Screwy's Kölsch Style Beer Brewday

While browsing through the online beer forums recently one post in particular grabbed my attention. It was from a fellow brewer, who after much debate over which style of beer to brew next, had decided to brew a batch of Kölsch beer. Always on the lookout for new and interesting styles of beer to brew, it seemed like this would be a perfect opportunity for me to join in the fun and brew one up too. Having the opportunity to brew the Kölsch style also presented me with a challenge, since up until now this style of beer still remained a mystery to me. You see from a brewing perspective a fair amount of reliable information had already been published explaining how to brew a classic Kölsch beer. But having never actually tasted a Kölsch beer before myself, some taste comparisons of authentic Kölsch beers would be needed, in order for me to judge how close mine was to the style.

Screwy's Kölsch Style Beer
The Kölschbier Style

Officially, the only way to brew an authentic Kölschbier, is to brew it in a brewery that is located within the Cologne (Köln) region of Germany. Even though the brewers in Köln have been brewing mostly Ales for well over a thousand years, the Kölsch style we drink today has only been in existence for about a hundred years. Thanks to the cooperation of Kölsch brewers in 1948, the Kölsch Konvention was created in order to formalize a modern brewing standard for the style. You see in order for the beer to be true to the Kölsch style it had to be fermented with top fermenting yeast, pale in color, very clear and hop accentuated. More recently in 1986, the Kölsch Konvention was amended to include a regional appellation, whereby only breweries that were located within a 50 kilometer zone around Cologne, Germany could legally be called Kölsch beer.

Screwy's Kölsch Style Recipe

This Kölsch style recipe is my interpretation of how a great tasting Kölsch beer can be brewed. The recipe is based in part on the beer style information published by the BJCP that is available for free on their website. The entire beer brewing process is part art and part science and ultimately the best way for a brewer to hone their brewing skills will be in brew room. Brew day is when everything comes together. It is where sanitization, yeast handling, pitching rate and fermentation control combine with grain, hops and water to influence the taste of the finished beer.

Every single step in the overall brewing process has some affect on the quality of your finished beer. Documenting what went right, and possibly what went wrong, on each brew day will be help ensure that your future brew days will go more smoothly. Taking the time to write down brewing notes is especially important whenever a recipe or a new brewing process has been modified. This way any improvements that were made, can later be referred to while brewing future batches. It is important when evaluating your beer for flavor, color, aroma and other characteristics of the style, that you also ask others for their opinion too. This way a comparison of their impressions of the beer are also compared against your own biased impressions. The honest feedback that you receive from beer drinkers, who are familiar with the style, will be helpful when evaluating your beer against authentic versions of the style.

The Water Profile

The water of Cologne, Germany is made up of two thirds ground water and one third river bank filtrate from the Rhine river. This mixture of groundwater water flows slowly through the subsoil of the Cologne Basin where the water is naturally filtered as it is collected into an enormous underground reservoir. The effect of extensive natural filtration results in water that is softer and lower in nitrate levels than the original groundwater and it is also free of pathogens and hazardous substances.

When brewing a Kölsch beer it is recommended to use soft water that has low levels of bicarbonates, calcium and magnesium. These are the preferred water properties to produce the authentic soft mouth feel of the style. A similar water profile that comes very close to that recommended for brewing a Kölsch is the Pilsner water profile. 

Replicating The Kölsch Region Water Profile
 My Personal Suggestions

"Prepare your brewing water at least a day or two before you plan to brew with it. This will save you a lot of time and leave you with one less thing to be done on brew day."

Waiting for brewing water to stabilize, in between water adjustments and taking pH readings, can prolong a brew day by several hours. If possible fill a container with RO water the day before and then slowly stir in the brewing salts and minerals needed to build the water profile. When adding in acid or base adjustments make them in small increments, then wait 20 minutes for the water to stabilize before taking a pH reading. Making smaller pH adjustments and then allowing sufficient time in between readings will reduce the chances of overshooting or undershooting your target pH value.


Calibrate your pH meter

"Buffers, moles, ions, cations, anions, acid, base, atomic weights, valence, electrons, Lewis structures, central atoms, bonding sites, mg/L as CaCO3, mg/L, ppm, milliliters, teaspoons. Really? Let me just arrange all that information in a way that's interesting and understandable by the majority of brewers" ~ Screwy Brewer

Routinely calibratng and maintaining your digital pH meter is the only reliably way of getting accurate pH readings consistently. Doing so once a month, for less than time then it takes to drink a beer, you will be able to keep your pH meter in perfect working condition.

  • Never let the probe dry out, always make sure that the pH bulb is always submerged in storage solution when not in use
  • Each month be sure to calibrate your pH meter using the recommended calibration solution for your meter
  • Always be sure to sample liquids at a temperature no warmer than of 80F to greatly extend the life of the meter's pH bulb
Screwy's Kölsch Water Profile (15.0 Gallons RO Water)

03.00 g - Gypsum (calcium sulfate)
09.00 g - Calcium Chloride
07.00 g - Epsom Salt (magnesium sulfate)
02.00 g - Baking Soda
08.00 ml Lactic Acid

pH = 5.42 @ 74F (calculated)
Chloride/Sulfate ratio 0.99
Residual Alkalinity -126
055 ppm - calcium
011 ppm - magnesium
010 ppm - sodium
076 ppm - chloride
078 ppm - sulfate

Double Crushed Grains Ready For Mashing

Bittering Unit To Gravity Ratio

When attempting to determine the perceived bitterness level of a beer recipe it is important to consider more than just the International Bittering Unit value. To get a complete picture of the hop bitterness to malt sweetness ratio, the calculated IBU value of a recipe should also be compared to the original gravity value of the recipe. The ratio of hop bitterness to malt sweetness, or the recipe's BU:GU ratio, is easily calculated using the IBU and OG values of the recipe. The Screwy's Kolsch recipe has a BU:GU ratio of 0.428 which is just a little less than the middle range of the BU:GU scale. For comparison a Wheat beer has a BU:GU ratio of .500, which is right at the middle of the scale, while a Standard American Lager has a value of .250 which is near the lower end of the scale.

The math involved in calculating the BU:GU ratio for any recipe is not difficult at all to do. For example, the bitterness value of the Screwy's Kolsch recipe is 24 IBUs and that value can be entered directly into the calculation as BU. The OG of the recipe is 1.056 and after dropping the 1. and multiplying the .056 remainder by 1000, the resulting number is 56, which is used in the calculation as GU.

Estimated Recipe Properties

    IBU  = 24
    OG   = 1.056
    SRM = 12
    FG    = 1.011
    ABV = 6.0%

Calculating the BU:GU ratio for this recipe is done by dividing 24 by 56 to get .428 as the answer. Basically the higher the BU:GU number the more perceived bitterness the finished beer will have when drinking it.

BU:GU Ratio : 24 / 56 = .428 (BU:GU Ratio Of Popular Beer Styles)


Whirlpool After A Vigorous 90 Minute Boil

The Grain Bill (10 Gallon Batch)

There are just two German grains used in the recipe, Pilsner malt and Vienna malt. The Vienna malt is considered to be optional because a Kolsch beer can be brewed using only Pilsner malt.

22.00 pounds Pilsen (German) (95%)
01.00 pounds Vienna (German) (5%)
-----------
23.00 pounds total grain bill


The Hop Bill

Bagging pellet hops before adding them to the kettle will limit the amount of hop debris that would otherwise collect at the bottom of the kettle. Having too much hop debris at the kettle bottom increases the likelihood that some of the debris will be sucked and clog a plate or counter-flow chiller. Clearing out a clogged chiller is not something you want to be doing while cooling down gallons of really hot wort. The hop schedule itself was pretty straightforward, consisting of a single 60 minute bittering addition added to the kettle. 

Hallertauer (Germany) pellets
------
5.00 ounces Total Hop bill


The Yeast

Ferment this batch at 60F pitching 2 White Labs WLP029 - German Ale/Kölsch Yeast™ 'pure pitch' packages into each 5 gallon fermentor. Early on brew day morning remove the pure pitch packages from the refrigerator and put them on a counter top where they can slowly warm up to room temperature. Once the fermentors are filled and the cooled wort then oxygenated for a minute, pitch the yeast right from the pure pitch packages.

White Labs WLP029 - German Ale/Kölsch Yeast™

4 White Labs WLP029 - German Ale/Kölsch Yeast™
------
Pitched directly from the packages


Putting It All Together

The first time mashing with an electric brew in a bag system you will have to figure out how much grain and brewing water will fit inside the kettle without causing it to overflow. With eBIAB systems heating the strike water, mashing the grains, sparging and boiling the wort are all done in a single vessel. Before being able to successfully brew using an eBIAB brewing system, after having brewed on a traditional three tier brewing system, you will need to learn a new set of calculations. Having a separate hot liquor tank, mash tun and brew kettle made calculating mash thickness and preboil volumes pretty straightforward, because the three vessels used provide much more volume to work with. The volume calculations when using only a single vessel system will take little more thought, since all three brewing processes have to share the same kettle.

With eBIAB brewing the strike water and grain used in the mash are added to the kettle at the beginning of the mash. The grain is placed inside of a fine mesh bag so that the sugars can be extracted into the wort while preventing any grain from getting into the kettle. At the end of the mash the mesh bag and grain are raised above the wort, rinsed with sparge water and then discarded. Once the wort is heated to a boil the remainder of any eBIAB brewing process is exactly the as any other type of brewing process.

Screwy's Kölsch 1.056 Original Gravity Sample

If attempting eBIAB brewing for the first time, remember it may take a few brew days before becoming familiar with the volume calculations involved. Brewing software like ezBIAB Calculator© will make all the kettle size, water, grain and hop volume calculations easy to do. Just enter the kettle size in gallons, amount of grain and hops used in the recipe, and the boil off rate and the brewing software will do the rest. Having the ability to do what-if type calculations is also very helpful in answering eBIAB brewing questions related to kettle size, mash thickness, water, grain and hop volumes.   

Example:

13.125 gallons: Pre-boil Volume
11.250 gallons: Post-boil Volume
10.000 gallons: Packaged Volume
Efficiency: 70%
Actual  Wort : IBU=24, OG=1.056, SRM=12, FG=1.011, ABV= 6.0%
BU:GU Ratio     :         24      /        56 = .428  Range: 0.25 (sweet) to 1.0 (bitter)

Mash at 149° F for 90 minutes
Mashout at at 168° F for 10 minutes
Sparge at 168° F until 13.125 gallons of wort has been collected in the kettle


Summing It All UP

It is a good idea to record the highlights of each brew day soon after you have finished brewing, while everything is still fresh in your mind. After transferring the fermented beer into kegs I was able to take a good look at the bottom of the fermentors where I noticed how tightly packed the WLP 029 yeast cake had become. The remaining beer that was sitting on top of the yeast cake remained clear even after it had been sloshing around over it yeast for a while. The krausen ring created during the fermentation was soft and easy to wipe clean using a damp sponge and some water.

Yeast And Krausen Ring Left In Fermentor After Kegging

Near the end of the boil the wort was pumped through a counter flow chiller to sanitize it and returned back to the kettle in order to create a whirl pool. The hops used during the boil for bittering, flavor and aroma were removed from the kettle before adding the final knock out hop additions. Once the pump was turned off, it took about fifteen minutes for the wort to settle down inside the kettle, allowing the cold break to fall the kettle bottom below the valve opening. Once the wort in the kettle cleared it was run through the counter-flow chiller to cool it down and then collected inside the fermentors.

1.011 Final Gravity Reading

The fermenting beer was held at 60F throughout most of the primary fermentation before the temperature was raised one degree each day for three consecutive days. Once the final gravity had been reached the beer was then cold crashed at 36F for three days before it was kegged and force carbonated. The Kölsch beer style tastes great when carbonated cold at 12-15 psi for 10 days, although it will reach peak flavor and clarity after cold conditioning for up to 6 weeks before serving it.

Kölsch Carbonated To 2.75 Volumes

The preferred serving temperature for Screwy's Kölsch beer really depends on your own personal preference and it can vary from one beer drinker to another. For a crisper pour I like to serve my beer at 36F and then finish the glass before the beer reaches 45F. As the beer warms above 45F the crispness will begin to fade allowing more of the malt flavor and aroma to become noticeable. Pour yourself a tall glass and then savor every sip as you enjoy the full range of crispness, flavor and aroma this beer has to offer. You will be glad you did!

Sunday, May 4, 2014

Brewing Water Demystified - Part II

The first chapter of this multipart series on brewing water properties Brewing Water Demystified - Part I touched on the two water properties a brewer needs to be concerned with in order to brew a really great tasting beer, alkalinity and mineral content. In this chapter, using a favorite all grain beer recipe of mine, I documented the same steps and directions used to create the brewing water profile I used to brew up a five gallon batch of IPA. To brew along with me you obviously still need to get the grains, hops and yeast just like you would for any other recipe.

You don't have to buy a digital pH meter, but if you have one you can use it to see and record the actual pH values as the water properties change. Small amounts of minerals and salts from gypsum, Epsom salt and calcium chloride combine to season the taste of the water while lactic acid and baking soda are used to lower or raise the brewing water pH so you'll need those too. I picked up my minerals and salts from Princeton Homebrew but they are also readily available at other fine home brew shops as well.

Screwy's Clock Strükker IPA

The example recipe calls for a pound of CaraPils and 11 pounds of US Two Row grain with Centennial and Cascade pellet hops. An ounce of Centennial is added to the kettle during the lauter, followed by an ounce of Cascade and a quarter ounce of Centennial at 18 minutes remaining to the boil. With 10 minutes remaining to the boil add another ounce of Cascade and a quarter ounce of Centennial.

At knock out add another ounce of Cascade and a half ounce of Centennial. For this recipe I recommend removing all the hops from the boil before adding the knock out hop addition and then removing the knock out hop addition before transferring the cooled wort to the fermentor. After the first full week of fermentation you can add another ounce of Cascade hops to the fermentor and let them soak in the beer until it's ready to package.

The Crystal Clear OG Sample Came In At 1.060

For the yeast I pitched an 11g package of Danstar Nottingham dry yeast to ferment the batch at 65F until the final gravity was reached. Before pitching the yeast you may want to rehydrate it in 95F sanitized water until it forms a nice smooth consistency. Optionally you can add a bit of yeast nutrient to the kettle just before flameout and oxygenate the wort before adding the yeast and closing the fermentor.

For this batch I used a single infusion mash at 156F and fly sparged the grains with 172F water to collect almost eight gallons of wort in the kettle. You can just as easily do a batch sparge or brew the batch using BIAB as the intent is to brew the beer as you typically would and then taste for yourself the difference that a modified brewing water profile makes on the finished beer.

The Water Profile

After a few quick calculations to determine the grain absorption, trub and boil loss for a five gallon batch of beer, the recipe was estimated to need nine gallons of water for both the mash and sparge. Filling a single food grade container with nine gallons of distilled water made mixing in the minerals, salts and taking pH readings while adjusting the water properties a lot easier to do. Next enter the nine gallon water volume into EZ Water Calculator under the B. Volume section, along with the weight and types of grain used in the recipe to find out what additions will be needed to get the water properties within the recommended range for this style of beer.

** Distilled water and reverse osmosis (RO) water provide perfect starting points for modifying brewing water profiles. Distilled water and reverse osmosis water in general have had salts, minerals, fluoride, chlorine and other substances removed from them by as much as 99%.

Distilled water could possibly contain oils even after the distillation process, volatile oils will be boiled off with the water and then condense back into solution once that steam has cooled. It's important to note that the ion concentrations of the original water are not changed during the distillation process and that the distillation process doesn't do a good job of removing chloramines or chemicals.

Reverse osmosis using Thin Film Composite membrane removes up to 99% of water impurities so the processed water is free of salts, minerals and other contaminants. The processed reverse osmosis water contains no chloramines and has only a few parts per million of salts or minerals than distilled water.

** Deionized (DI) water is processed by running reverse osmosis water through a special deionization resin filter that removes nearly all the ions from the water. The imbalance of the water properties due to these missing ions however complicate the solution of minerals, salts and pH range adjustments made to the brewing water profile. The use of deionized water should also be confirmed safe for human consumption and free from any traces of deionizing resins, adding a carbon block filter stage after the deionizing resin membrane is recommended.

Calculating Both Mash And Sparge Properties The Same Way
It's up to you the brewer to determine the best way of calculating the water property additions though. You may later decide that adjusting the pH of the mash water is more important to you and that the salt and mineral additions are best left for the kettle at boil. For me it's just easier treating both my mash and sparge water the same way, adjusting the pH the same for each and the using the same salt and mineral additions.

Doing it this way you only have to modify nine gallons of water to fall within the 5.4 to 5.6 pH target range and have enough buffering to keep it there once it comes into contact with the grains in the mash. I'm a single infusion mash fly sparger by nature so rinsing my grains with the same modified water properties as the water used in the the mash tun makes the most sense to me.

Add Your Grain Bill To Let EZ Water Calculator Know Where To Begin
Now that EZ Water Calculator knows how much water volume it has to work with it next needs to know what types of grains are being used in the recipe and in what amounts. Entering the grain bill provides the average pH value for each grain type and are applied to the calculations that follow. The pH value printed on sack of grain varies by maltster, year, season and countless other factors. The calculations used to determine these pH values have been tweaked and tuned over the years based on feedback from brewers who use EZ Water Calculator to calculate their mash pH.

At Room Temperature The Recommended pH Range Is 5.4 To 5.6
The first goal of modifying your water profile is to get the water's pH reading within the recommended range of 5.4 to 5.6 with the water at room temperature. Using distilled water all it took was 2.5 milliliters of lactic acid added to the water and stirred for several minutes. The pH readings should be taken fifteen minutes or so after making that last adjustment to allow the water enough time to stabilize. When adjusting pH going slow is a good idea because adding two milliliters may not make a huge difference but adding another may move the needle a whole lot more than you'd think.

Season The Water Based On The Style Of Beer
Using distilled water and adding lactic acid will adjust the pH downward, if you find the pH too low it can be raised by adding some grams of baking soda. Baking soda will add a bit of sodium to the water but it's easily calculated and displayed to make sure you stay within the recommended range. Lactic acid has a flavor threshold of about four milliliters per gallon so unless you're modifying your water for a sour beer you'll want to stay well below those amounts.

Think Gypsum For Crispness Calcium Chloride For Maltiness
It all breaks down to this, with your mash pH staying nearer to the lower end of the recommended pH range, you'll get better conversion a more fermentable wort that's clear, colorful and flavorful with a very low risk of tannin extraction. Towards the upper end of the recommended pH range, you'll still get better conversion a slightly less fermentable wort that's clear, colorful and flavorful with a very low risk of tannin extraction.

The salt and mineral amounts can be adjusted to enhance the crispness and hop character of the finished beer or to highlight the beer's malt flavor and they do it in a way that's not possible by using only different grain bills or yeast types. The flavors of the beer are clearer and more pronounced, the clarity and color of the beer is cleaner and the overall perception of the beer is taken to a higher level of enjoyment.

Cleaner Tasting Beer With Bolder Flavor
"Buffers, moles, ions, cations, anions, acid, base, atomic weights, valence, electrons, Lewis structures, central atoms, bonding sites, mg/L as CaCO3, mg/L, ppm, milliliters, teaspoons. Really? Let me just arrange all that information in a way that's interesting and understandable by the majority of brewers" ~ Screwy Brewer

There you have it, the perfect IPA recipe and all the details and steps taken to create a matching water profile, what could be easier than that. Using EZ Water Calculator and distilled water to tune and tweak my brewing water profiles I've since brewed a light colored IPA, an amber ale, a wheat beer and two dark beers using chocolate malt and they've all tasted much better. It's interesting to learn with each style of beer brewed the impact on the levels of flavor different water properties have on some ingredients.

For example the coffee and chocolate flavors extracted from Carafa III and Chocolate malt went through the roof, when compared to similar batches brewed with unmodified water profiles. Now I know why some recipes call for 3 ounces of each where before I was happy to just round it off to the nearest half pound. Other additions like coriander and flaked rye seem to suddenly pop out in front or take a more subdued role in the background flavor. One thing is for sure once you've learned the basics to modifying your brewing water profiles and tasted the huge differences in your beer you'll be hooked too.