Showing posts with label water. Show all posts
Showing posts with label water. Show all posts

Saturday, November 26, 2016

ezBrewingWater-RO©

 ** Version 2 Now Available **

ezBrewingWater-RO© is a water chemistry calculator created specifically for homebrewers who want to use the best water possible when brewing their beer. When starting out with an RO water source there is no need to interpret water reports or having to guess at water variances associated with seasonal change. Building a brewing water profile, using reverse osmosis or distilled water, is easy to do because salts and other impurities have been stripped away. When starting out with pure brewing water you replace only the salts needed to match the style of beer that you are brewing. Then adjust the pH of your brewing water to optimize enzyme efficiency in the mash. ezBrewingWater-RO© makes even the most complicated brewing water profiles easy to do. With a little practice you will be designing your very own brewing water profiles and actually enjoying the process.  

ezBrewingWater-RO© - The easy way to perfect brewing water!

RO and distilled water have extremely low alkalinity and they are devoid of salts and minerals. They both make the ideal water source to use when creating brewing water profiles that are perfect for any style of beer. ezBrewingWater-RO© makes it easy to choose just the right amount of salts and minerals needed to season brewing water to suite your taste. Adjusting the pH of your brewing water so that the mash stays within an optimal pH range, based on the type of grains used in a recipe, has never been easier to do. ezBrewingWater-RO© is the easy way to perfect brewing water!


Download ezBrewingWater-RO© Version Two 





Homebrewers already know that water is the single largest ingredient used in the beer that they brew. Many have heard it said, or possibly read somewhere that "If your water tastes good, you can brew good beer with it" and yes, of course, that makes perfect sense. But what exactly is in water that makes it 'taste good' and what enables it to make 'good beer'? After all, the water piped into your home today looks and tastes just fine. It contains no sediment, it is sparkling clear in a glass and it tastes good; even if it were to have a slight chlorine aroma. Water like this should be perfect for brewing a 'good beer' right? The simple answer is no, at least not by today's homebrewing standards.


Getting Started:

Enter The Volume Of Water To Be Treated

ezBrewingWater-RO© was created to be used with reverse osmosis, commonly known as RO water, or distilled water. Both types of purified water, RO, and Distilled have been stripped clean of any salts, minerals and other impurities that the source water contained. The water produced by either process has extremely low alkalinity, is devoid of salts or minerals and makes the perfect base water to use when creating any brewing water profile. RO and distilled water are both inexpensive to use and are readily available to buy in many local stores.

Enter The Grains Used In Your Recipe

The flavor and alkalinity of RO water can be restored by replacing measured amounts of salt and mineral content that were stripped away during filtration. Adding measured amounts of gypsum, calcium chloride, Epsom salt and Baking Soda to RO water also adjusts the sulfate to chloride ratio of your brewing water; making it more suitable for any style of beer. The pH level of your mash water can be raised by adding Baking Soda or it can be lowered by adding Lactic Acid, or the mash itself can be lowered by the addition of acidulated malt directly in the mash.

The type of grains used in a recipe determines the acidity of the mash, darker more acidic grains will lower mash pH much more than lighter grains such as 6-Row and wheat. To achieve the best enzyme activity and conversion of starch to sugar the recommended mash pH range is between 5.3 and 5.5 at 77F. Wort produced using a water profile that keeps the mash pH within this range, or 5.1 to 5.3 at mash temperatures, also helps to enhance the performance of yeast during fermentation while discouraging the growth of bacteria. 

Enter The Amount Of Salt, Mineral And Acid To Match Your Beer Style

Homebrewing combines the art of recipe creation with the science of brewing, including the science of water chemistry. Throughout recorded history, the most famous styles of beer originated in unique geological locations. Two prominent styles that come to mind are Kölsch from Cologne, Germany and Dry Irish Stout from Dublin, Ireland. The soft waters of the Cologne Basin give Kölschbier its authentic soft mouth feel while the hard, alkaline waters of Dublin, Ireland accentuate the dry creamy mouthfeel of Stout.

Review The Calculated Water Alkalinity And Mash pH Values


Eliminating chlorine is a very important first step when preparing your brewing water. Chlorine in brewing water is notorious for causing off flavors in beer but fortunately, it is easily removed by slowly running the water through an activated carbon block filter. Chloramines in brewing water will also cause off flavors in the beer and they can be removed through activated carbon block filtering too. The ability to remove chlorine and chloramines are governed by the amount of activated carbon that the water flows through and by the length of contact time the water has with the activated carbon.  

Now that all traces of chlorine or chloramines have been removed the brewing water is perfect for brewing a 'good beer' right? Yes it is, but unfortunately, it is not good enough to brew a great beer. Great beers are brewed using water that has the just the right levels of salts, minerals, alkalinity, pH and a few other important properties. The improvements needed to turn good brewing water into great brewing water requires the use of some very powerful chemistry formulas. A water chemistry calculator like ezBrewingWater-RO© lets you focus on creating the perfect water profile for your next beer without having to worry about the complex chemistry that is involved.


Acknowledgements:

If it were not for the pioneering spirit of visionaries such as John Palmer, Colin Kominski, Kai Troester, AJ Delange and Martin Brungard, brewing water calculators like ezBrewingWater-RO© would not be available to the homebrewing community today. Their tireless dedication and commitment, to applying the laws of science and water chemistry to homebrewing, has given rise to the immense popularity and the superior quality of homebrewed beer.      


Friday, September 4, 2015

Screwy's Hazy Daze Dry Irish Stout

As the Fall season approaches here in the Northeastern United States it brings with it the shorter days and cooler temperatures that signal the end of summer. In a few weeks the leaves of the deciduous trees in my neighborhood will start to change color. The same green leaves that provided cooling shade throughout the hot summer months will soon change their colors to yellow, orange, red and gold as they prepare to fall to the ground.

When I Think Of The Fall Season I Begin To Think Stout
The Fall months are also the time of year when I look forward to spending more enjoyable days and nights in the brew room. Cooler air temperatures easily offset the heat and humidity produced by kettle boil vapors and cooler tap water temperatures help to chill boiling wort down more efficiently too. It's the perfect time of year for brewing beer and building up a pipeline for the long winter months that lie ahead.

With the coming of the fall season and its cooler more comfortable brewing weather also comes a change in the styles of beer to brew. In my mind there's few things more enjoyable than the combination of crisp cool fall air and the delicious fragrance produced by a batch of stout boiling in the kettle. As the signature aromas of the Dry Irish Stout develop in the wort the air inside the brew room grows thick with the deep rich smell of roasted coffee signalling the start of the fall brewing season.

Screwy's Hazy Daze Dry Irish Stout

A Little Bit About Stout

The word 'Stout' has reportedly been part of the beer vocabulary for over a thousand years. By some accounts it was first used in reference to the traditional unhopped Celtic ales of Ireland. It was also used in reference to the higher alcohol content Porter ales of London which had become very popular in England in the 1730's, with the higher alcohol versions of the style referred to as Stout Porters. In both counties however it was the thirsty pub patrons ordering those dark, roasty, high alcohol ales as 'Extra Porter Stout' or 'Extra Superior Porter' who eventually shortened the names down to 'Extra Stout' and then ultimately down to just 'Stout'.  

Over time the meaning of the word stout was revised many times taking on several meanings and interpretations. In the world of beer today the word stout refers to a dark roasty flavored ale. The stout beer style includes related sub styles like 'Dry Stout', 'Sweet Stout', 'Oatmeal Stout', 'American Stout', Foreign Stout' or 'Russian Imperial Stout' that continue to grow in popularity. Just about every brewery or brewpub has at least one stout on tap and to make things more interesting some brewers have even created light colored stouts.

As I talk beer with people today some still refer to a stout as being a heavy beer as opposed to being a lighter beer. In some instances they were put off by the dark color of a stout more than mouth feel or alcohol content. Their reason for preferring a lighter beer over drinking a stout must of had more to do with the coffee like flavor of dark roasted Barley more than anything else. When I pointed out that a glass of Guinness Stout had only 15 more calories in it than a glass of Bud Light they were really equally surprised. 

I Love The Smell Of Dry Stout Brewing In The Morning

About The Stout Recipe

My personal favorite style of stout to brew and drink is the classic Dry Irish Stout. To me no other style of beer smells quite as warm and inviting on brew day as it boils in the kettle. My time tested recipe for brewing the Hazy Daze Stout has evolved over the years to use a mixture of just three grains. Seventy percent Pale Malt, twenty percent Flaked Barley and ten percent Roasted Barley are all the grains that are required. At just under 5% alcohol by volume this recipe produces a very drinkable stout that I've enjoyed by itself or as a dessert with the addition of a scoop of vanilla ice cream.  

Mashout Complete Just Prior To Lifting Grains And Sparging

The UK Kent Golding hops I use in my Hazy Daze Stout recipe are used for bittering only and they are boiled for no less than thirty minutes. The aroma and flavor of this classic stout style comes primarily from the dark roasted malts and not from the yeast or hops. For fermenting this stout I like using White Labs WLP004 - Irish Ale Yeast™ at a rate of 200 billion cells per 5 gallons of finished beer. For my ten gallon batches I make a four liter yeast starter using two vials of WLP-004 and a stir plate. Of course as with fermenting any beer maintaining strict temperature control throughout the fermentation will provide the best results.
   

About The Brewing Water

Not all brewing water is created equal, that's why I installed a reverse osmosis filter in the brew room. Not having the patience to understand the chemical makeup of my local tap water I took the somewhat easier way out. The water output of my RO filter is consistent year round making the amount of salt and minerals needed to adjust my brewing water much simpler. The pH of the RO water is also consistent and can be easily adjusted downward using 88% Lactic Acid or upward with Baking Soda if needed.

After Mashing Collect Pre-boil Volume In Kettle 

To prepare the brewing water the night before brew day I fill a 15 gallon container with RO water and then add to that my brewing salts and minerals as listed below. I also add in the Lactic Acid and then stir them in for a few minutes. After waiting 20 minutes for the water to begin to stabilize I carefully calibrate my digital pH meter and take the first reading. When trying out a new brewing water profile for the first time it may take several adjustments to get the pH fine tuned. But once everything looks good I save the water recipe for future use.

The dark roasted barley used in a stout recipe will add a lot of acid to the mash which will push the mash pH reading downward. The ideal pH range I try to stay within for mashing and sparging is between 5.4 and 5.6 when measured at room temperature. In addition to adjusting the pH of the brewing water salts and minerals are added to flavor it and increase the water's buffering capacity to resist changes in pH. Traditional stout brewing water is very alkaline that is to say it is high in bicarbonates and very resistant to changes in pH. Using RO or distilled water and ingredients that are readily available at any LHBS allows you to modify your brewing water to closely replicate the traditional stout brewing water profile quite easily.    

Hazy Daze Stout Water Profile 15.0 Gallons
07.00 g - Gypsum (calcium sulfate)
18.00 g - Calcium Chloride
03.00 g - Epsom Salt (magnesium sulfate)
02.00 g - Baking Soda
02.00 ml - Lactic Acid 88%

pH = 5.43 @ 75F (calculated) 
Chloride/Sulfate ratio = 1.71
Residual Alkalinity = 105
114 ppm - calcium
005 ppm - magnesium
010 ppm - sodium
153 ppm - chloride
089 ppm - sulfate


Bittering Unit To Gravity Unit Ratio

When trying to determine the perceived bitterness level of a batch of beer it's important to look not only at the International Bittering Unit, or IBU, value alone to get that information. In fact a recipe's IBU value has to be weighed against the recipe's original gravity units, or GU, to get the complete picture. The overall balance between bitterness and the sweetness of the malt in the recipe is a great indicator of perceived bitterness in the finished beer. The Dry Stout weighs in at the upper end of the BU:GU scale at a little bit under 0.90 with Wheat beer coming in at around 0.50 followed by Weissbier at 0.25.

The math involved in calculating the BU:GU value for any recipe is pretty simple although I still rely on a calculator to keep my answers honest. The bitterness value of the Hazy Daze Stout recipe is 41 IBU and is plugged directly into our calculation. The original gravity of the recipe is 1.047 and by multiplying it by 1000 we get the number 47, which we also plug into our calculation.

Estimated Wort Properties
  • IBU  = 41 
  •  OG  = 1.047
  • SRM = 26 
  •  FG   = 1.013
  • ABV = 4.6%
Now to calculate the BU:GU for the recipe we divide 41 by 47 and get .872 as our answer. Basically the higher the BU:GU number the more perceived bitterness the finished beer will have when drinking it.

BU:GU Ratio : 41 / 47 =  .872 (Ratio Of Popular Beer Styles)


The Grain Bill

One of the things I like best about drinking a lower alcohol stout is that they make for a nice session beer. You can really enjoy drinking several of them without worrying about having them knock you for a loop. Since I've been brewing using the brew in a bag (BIAB) method I order all of my malted grains double crushed because it has helped me to get better brewing efficiency. I also use a 90 minute mash with a 10 minute mash out before lifting the bag of grains out of the kettle and sparging them.

16.25 pounds Pale Ale (70% of grist)
04.50 pounds Flaked Barley (20% of grist)
02.25 pounds Roasted Barley (10% of grist)
-----------
23.00 pounds total grain bill


The Hop Bill

I bag my pellet hops before adding them to the kettle because it keeps a lot of the hop debris out of the wort. I don't ever want to clog up the counter-flow wort chiller with any of the sand like hop particles while cooling down the wort. The hops are added to the kettle as first wort hop (FWH) additions since I'm only interested in getting bitterness from them, any flavor and aroma should come from the roasted grains.

5.00 ounces Kent Goldings (U.K.) pellets
------
5.00 ounces Total Hop bill


The Yeast

Before pitching the liquid yeast used for this recipe I brew up a one gallon unhopped batch of 1.040 gravity beer to use in the yeast starter. After cooling the wort down to room temperature I pour the contents of two vials of room temperature liquid yeast into a four liter Erlenmeyer flask. Next I add the starter wort, drop in a stir bar and let it spin on a stir plate until the krausen rises and then falls in on itself. At that point I cover the flask opening and set it in the refrigerator for a few days to cold crash so the yeast can settle out to the bottom of the flask.

WLP004 - Irish Ale Yeast™ And 4 Liter Starter


Early on brew day morning I remove the flask and set it out on a counter top to warm up to room temperature. Once the wort has been cooled and the fermentor filled up I oxygenate the wort just prior to decanting the extra wort from the flask and pitching the yeast starter. As for yeast nutrient I do add that directly to the boil at about 10 minutes before flame out, it's a habit I got into years back irregardless of the gravity of the beer I'm brewing.

White Labs WLP004 - Irish Ale Yeast™
------
2 Vials in a 4 liters of 1.040 wort (starter made in flask on a stir plate)


Putting It All Together

I set my brew house efficiency at 70% when developing recipes and the beer brewed using eBIAB has consistently come in very close to the calculated numbers. The percentage of hop alpha acid will vary from batch to batch of UK Kent Golding or any type of hops for that matter. I make sure to adjust my brewing software accordingly by entering the alpha acid percentages listed for the current batch of hops I buy. The closer your brewing software is to matching the actual numbers of your brewing system and the ingredients used the better the chances are that your finished beer will come out as expected.

The first time I brewed using my brew in a bag system I wondered how much grain and brewing water would fit inside my kettle without causing it to overflow? Then I wondered how much wort would be left in the kettle after removing the grain bag? Before switching from a traditional three tier system to an eBIAB system these calculations had never been too much of a problem. Having a separate hot liquor tank, mash tun and brew kettle made calculating mash thickness and preboil volumes pretty straightforward.

With BIAB brewing all of the water and grain used in the mash goes into the kettle at the same time. During the mash grain is put inside a fine mesh bag so that sugars can be extracted into the wort without any of the grain getting into the kettle. At the end of the mash the grain and bag are then removed and the wort remaining in the kettle is brought to a boil. The trick to all of this is to prevent the kettle from overflowing with too much mash volume while being able to hit your preboil wort volume after the grain has been removed. 


11.75 gallons: Pre-boil Volume
10.00 gallons: Packaged Volume
Brew. Efficiency: 70%
Estimated Wort : IBU=41, OG=1.047, SRM=26, FG=1.012, ABV= 4.6%
BU:SG Ratio     :        41      /       47 = .872 Range: 0.25 (sweet) to 1.0 (bitter)

Mash at 152° F for 90 minutes
Mashout at at 168° F for 10 minutes
Sparge at 168° F until 11.75 gallons of wort has collected in the kettle


Summing It All Up

For the fermentation I fill up two 6.5 gallon fermentors, each with 5.25 gallons of wort, and after pitching the yeast and oxygenating place both of them into a temperature controlled chest freezer used as a fermentation chamber. I use a BrewsBySmith Fermentation Kit to closely monitor and control the fermenting beer temperature right through to the end of primary fermentation.

I like fermenting my Ales on the low side and for my stout I initially set the fermentation temperature to 66F and hold it there before raising the temperature one degree a day after the first three days of fermentation. After the temperature of the wort has been raised to 70F its then held there for one week before cold crashing the fermented beer to 36F for another week.

Treat Yourself, Your Friends And Family To A Classic Stout This Year

Once the beer has been cold crashed for a week its ready to transfer to a set of corny kegs placed in the refrigerator and forced carbonated with Co2 set to 15 psi for a week. I just set and forget the Co2 because I found it gives the most consistent carbonation results and I'm just too lazy to be rolling my kegs around on the ground trying to get the beer carbonated a day or two sooner.

After a week of force carbonation the beer is ready to serve or package in 12 or 22 ounce bottles if needed. For filling bottles or mini-kegs I use the Blichmann BeerGun™ to do the job because it allows my to get clearer beer with more consistent carbonation in the smaller packaging sizes than when using priming sugar for carbonation and more quickly to. Well that about wraps it up cooler weather, a brewroom filled with delicious coffee-like aromas on brewday and a rich warming session beer that's pretty hard to beat. Do yourself a favor this Fall brewing season and brew up a batch of stout and be the envy of all your friends.


Wednesday, August 27, 2014

More About Brewing Water

As the summer months here in the northeast slowly begin to fade into memory a lot of homebrewers thoughts will return to brewing beer again. This is shaping up to be yet another great year for homebrewing thanks to the dedication of folks like those at HomeBrewTalk, the world’s largest website dedicated to all things home brewing. They have recently launched a new front page section to their website that's loaded with information valuable to every homebrewer.

Today my article Understanding Your Brewing Water - And Why has been featured on the front page of the HomeBrewTalk website, be sure to check it out.

Sunday, March 16, 2014

Brewing Water Demystified - Part I

In this first of a multipart part series on brewing water properties I explain the most basic information you'll ever need to know for making delicious tasting beer. In my view a brewing process consists primarily of three main parts. Each part of the process influences the taste and flavor of beer in their own unique way. Having the perfect recipe is the first part of the brewing process, it's where the grain bill selections and hop schedules are created. As the recipe evolves it influences the flavor of the wort during the mash when the grains soak in hot (147-158F) water. The wort produced by the mash is drawn off the grain bed then boiled for an hour or more. Hop and other kettle additions like fruit and spices in measured amounts can also be added to the wort creating even more complex flavors in the beer. Yeast has to get a mention too, the temperatures and strain used to ferment wort into beer also influences the flavor of beer.

We're primarily interested in the first part of the brewing process when selecting grains for a style of beer, its also a great time to adjust the brewing water properties. Different styles of beer come from different regions of the planet, knowing that can help when researching the water profile of any specific region on earth.

The Right Water Profile Produces Clear Flavorful Beer
The second part of the brewing process starts when the wort has cooled and the yeast is pitched. This is where things like yeast cell pitching rates, the type of yeast and propagation methods contribute their flavors to the beer. Sanitization and temperature control play key roles during fermentation too by coaxing the yeast into producing beer flavors in ways that only yeast can. Brewing with the right water profile significantly improves the flavor of grain, hop and other ingredients but it also provides the perfect environment for yeast to produce a healthy fermentation. Its time to demonstrate how the pH and alkalinity of brewing water actually improves the taste of beer, but before that we should do a quick review of the third and last part of the brewing process.

Simple Ingredients To Adjust Alkalinity And pH
Packaging is obviously the last part of the brewing process because this is how our beer is stored and delivered to be enjoyed by other craft beer lovers everywhere. After a seven day stay in the refrigerator the beer in the fermentor clears up considerably. During that time the yeast has fallen out of suspension and stuck to the bottom of the fermentor and the cold beer is ready to be kegged or bottled. The carbonation level of the beer contributes to it's flavor as the Co2 levels are adjusted up or down. Higher levels of carbonation tend to give the beer more bite and add to it's perceived bitterness than lower levels of carbonation. Extra care taken during packaging will guarantee that your beer will still taste fresh and full of flavor for many months to come.

There we have it a brief overview of the three main parts of the beer brewing process, with the fist part being identified as the most important for water properties. Once the water properties have been adjusted correctly for mashing and sparging our grains they will be perfect throughout the rest of the brewing process everytime we brew.


Benefits Of Brewing With The Right Water Profile

Whenever I mention brewing water chemistry to most people their eyes start to glaze over and they politely change the subject to something more interesting. Unless of course they're professional brewers, have a passion for chemistry or are career hydrologists with plenty of lab experience. Learning to identify and understand the effects of atoms, ions and molecules on brewing water is a bit more difficult than learning about other areas of the brewing process. The average beer drinker will taste the difference good brewing water adds to the flavor of a beer but they typically won't ask anything about the brewing water profile. They may love the fresh bright hop aroma in your IPA but you'll never hear them say things like 'it could've used a bit more gypsum'. Discussing water properties over a cold one isn't the most interesting topic of conversation for everyone but that could also be the reason why home brewers consider it to be a subject left only to advanced brewers. Creating a good water profile really isn't that hard to do once you've learned a few basics.

Kettle View Of Bright Clear Wort Color And Compact Cold Break
To understand how something as simple as water can make such a huge difference in our finished beer we'll have to talk a little bit about alkalinity and pH. The alkalinity of our brewing water reacts with the potassium released during the mash. To get the best wort color, clarity and conversion rates the pH of the mash should remain stable, somewhere between 5.20 and 5.40 at mash temperature, throughout the mash. But all water contains buffers that resist changes to alkalinity and pH, just how hard the buffers resist change depends on the strength of the buffers. There are several software packages out there that calculate the salt, mineral and acid amounts needed to adjust the water pH to match any given style of beer and they're easy to use. 

A Crystal Clear 4 SRM Color OG Sample
Once you see how easy measuring, evaluating and modifying your own water profile is you'll wonder why you waited until now to try it. By adding small amounts of gypsum, Epsom salt, calcium chloride and lactic acid to your brewing water the mash will produce clearer wort with improved color and flavor and higher conversion rates. The ingredients are readily available at your local home brew store, are inexpensive to buy and completely safe to use in recommended amounts. Mashing within the recommended pH range efficiently converts starch into sugars and the grain bed develops finer particles that dramatically increase it's filtering capacity which makes the wort extremely clear and colorful.

Grain Bed With Fine Particles That Filter The Wort
Overall the most obvious benefit of brewing a recipe using the right water profile is a better tasting beer. For comparison I brewed the same recipe I have been brewing for years using filtered tap water but this time I brewed the recipe using a water profile I modified myself. I can't even begin to tell you how much better the modified water version came out than any of my original tap water versions. The color of the beer was extremely light and it looked great in the glass. The hop aroma was bright and clean and the beer had a nice flavor from the combination of grains and hops.

The most remarkable thing for me is that I had also managed to capture that nice bready taste noticeable when exhaling through my nose after swallowing a sip of beer! Up until now I had found this one single component lacking in almost all of my previous beers. Some of my beers would have this bready finish but I'd never been able to consistently reproduce it with every brew until now. It never occurred to me that this bready finish was attributed to the brewing water and mash pH more than it was to the grain bill or yeast alone.

It's important for a brewer to produce the best tasting example of their beer consistently and that basically means having the ability to mash grains within a recommended temperature and pH range throughout the year. Ultimately that comes down to being able to brew using water that has consistent properties throughout the year. Water properties from the same location can vary widely from season to season so each batch of brewing water needs to be analyzed for it's mineral content and pH value before being used to brew beer  and then modified as needed to match the beer recipe's water profile. 


Using The Tools Of The Trade

There are two different approaches to modifying brewing water. The simplest approach is to start off with either distilled water or reverse osmosis water that basically has had all mineral content removed from it already. This provides a source of water with a consistent baseline to use when calculating the salt, mineral and acid additions needed to build a particular water profile. I prefer this approach over the alternative of doing frequent water analysis to determine the seasonal adjustments needed to compensate for changes in the water's properties. In my view it's definitely easier to start off with water having the same properties because water profile adjustments can be easily repeated based on the results of prior brews.

This becomes even more important when entering values into the EZ Water Calculator because when using reverse osmosis or distilled water you simply have to enter the volume of water in gallons as 100% of the total water volume. Otherwise you have to take the results from your latest water test then enter those amounts as parts per million of calcium, magnesium, sodium, chloride and sulfates in order to calculate the amount of additions needed to reach the recommended mash pH value.

Calculating 4 Gallons Of Mash And 5 Gallons Of  Sparge Using Distilled Water
Once the confusing part, whether to use your local water supply with seasonal water quality reports or reverse osmosis or distilled water with their consistent properties, has been decided and entered we need to enter the grain bill. Darker malts have an acidic value which works to lower the water's pH value, which is really just an indicator of the water's alkalinity. In contrast pale malts do very little to lower the water's pH because they are not as acidic as darker malts. We can't rely on pale malts to lower the water's pH enough but by adding lactic acid and other minerals we can reduce the water's pH while strengthening the water's buffering properties.

Darker Grains Add Acid And Lower The pH More Than Lighter Grains

Buffering properties?! Let me explain. Let's assume that reverse osmosis water has had all of it's minerals and salts removed, in effect weakening it's buffering capabilities. Now the slightest additions of either acid or base minerals will swing the pH values down or up accordingly. But as we add gypsum, calcium chloride and Epsom salt to the water we start to strengthen those buffers to the point where they become much more resistant to pH value changes when acid or base minerals are added. This is exactly what we want in order to maintain a constant mash pH in the 5.20 to 5.40 range throughout the mash. If you've decided to use your local water supply you have to determine it's pH, salt and mineral content to understand it's buffering strength and then calculate the additions needed to maintain the recommended pH range during the mash. 


Digital pH Meter With 4.01, 7.01 Calibration Buffers
You've managed to hang in there up until now. I can tell because you're still reading this post. We can assume you are serious about your brewing water properties and learning how modifying them correctly will produce the best tasting beer ever. Going forward you will need a quality digital pH meter with a resolution of a tenth of point and calibration buffer solutions to correctly calibrate the meter before each pH reading. A digital scale is also needed that can measure to the tenth of a gram. This type of scale is very useful when measuring out salt and mineral additions. Each salt or mineral has a different weight per teaspoonful so having the ability to accurately measure grams will make modifying water properties much easier. Lactic acid comes in liquid form and the additions are calculated in milliliters so a small syringe like those used to administer children's doses of liquid medicine are perfect to use.


What's Next?

In part II of this series we will build on the basics laid out in this post and brew a hypothetical batch of beer using a water profile made from scratch. I've already brewed several batches of beer using the same recipe and brewing water profile and I will include every step of the brewday in detail. If you choose to you can brew a batch of beer for yourself at your own pace by simply following the brewing instructions. The basic recipe is an East Coast IPA style made from a pound of CaraPils and eleven pounds of US 2 Row malt. Two ounces of Centennial hops and four ounces of Cascade hops provide the bittering, flavor and aroma. But the recipe really comes to life when mashed using the modified water profile we will build together and the resulting beer will be delicious.


Wednesday, October 13, 2010

Screwy's Fermentation Chamber

 I've been fermenting my ales in my home office, placing the Mr. Beer fermentation kegs on my desktop and using a window air conditioning unit to maintain 70F during the warmer months. After brewing 30 separate ale recipes and fermenting them this way I decided it was time to consider using a fermentation chamber to control the temperatures instead. 

The design criteria was simple the chamber had to hold up to 4 Mr. Beer kegs, since I usually brew multiple batches on the weekend. It also had to be very well insulated since it would be cooled using frozen water bottles. Oh and I almost forgot to mention that the wood used to construct the chamber had to be cut and assembled using only a small jigsaw, a 3/8" power hand drill and a few screw drivers.





Enjoying A Glass Of Chocolate Covered Cherries During Construction

  I sat down and spent a fair amount of time drawing out the dimensions and figuring out the construction method I would use. I wrote down the sizes of the pieces of plywood I would need for the top, bottom and sides and included some 1" x 3" pine boards to use for internal framing and constructing the chamber. 

Original Design Drawing

  Next it was off to Home Depot where I selected the 2 sheets of 1/2" plywood and had them cut into the size pieces I needed, which worked out really good for me since my only power saw was a small jigsaw and not very good for cutting large pieces of plywood. To hold the chamber together I used 1 1/2" and 3" sheet rock screws, the kind used for drilling into metal studs, after coating the joints first with wood glue.


 The Inside Is Lined With 2 Inch Thick Foam Board

 I lined the inside of the chamber with 2 inches of heavy duty foil backed foam insulation and sealed the joints with foil backed tape and duct tape to assure an airtight seal. The plan was to use frozen water bottles placed at the top of the chamber, since the cold air would naturally sink to the bottom and force the warmer air back up to the top to be cooled.


Plastic Storage Container From Walmart Collects Condensation


  After assembling the chamber, doors, hardware and insulation I filled in any imperfections caused by the screws with wood filler and sanded the surfaces smooth. The finishing touches are still waiting to be completed, I plan to give the chamber a fast coat of urethane stain to protect the outside from spills. Although this piece of furniture won't be making it's way to my living room anytime soon, it will provide me with years or worry free service and a lot of lager beers.

The Chamber Holds Up To 4 Mr. Beer Kegs

  The total cost of the project so far is under $200.00 and 4 or 5 trips to Home Depot, not to mention my time spent designing, building and finishing the chamber. The project was fun though and it gave me something to do while my current 3 batches of beer were fermenting away. The next time I post an update on Screwy's Fermentation Chamber I hope to show the finished product with 8 plus gallons of lager beer fermenting away.

Screwy's Fermentation Chamber In Progress

When I designed the fermentation chamber I had kept in mind that someday I would be using carboys or ale pails instead of the Mr. Beer little brown kegs. Today I mostly use 6.5 gallon white plastic fermentation pails for my 5 gallon batches. The chamber's inside dimensions allow it to hold two of these ale pails at a time with room to spare for the cool air to circulate.

At the time of this posting the chamber will be two years old in a couple of months and it still looks and works like the day I finished building it. I find myself using it more now than I ever imagined I would back then when I first thought of building one instead of buying a refrigerator and Johnson controller setup. Of course I did buy a small refrigerator for my beer, kegs and to make the frozen water bottles so now I have the best of both worlds. 

Monday, May 31, 2010

It's all about the water.



As a general rule of thumb about water quality when brewing beer, 'If your water tastes good, your beer should taste good'.



I recommend installing a water filtration system and filtering your tap water prior to using it for brewing.



Although many water odors will dissipate during the boil, some bad tastes need to be removed via filtration.

According to the many articles I've read, never use distilled water for your wort, as it lacks the minerals and nutrients needed for proper yeast fermentation to take place.

You also don't want to use chlorinated 'city' water or your finished beer can have high levels of chlorophenols which introduce some nasty off-flavor flaws.

Using a good 2 stage filter will remove the chlorine from the water while leaving the good minerals and nutrients intact.

I use a 2 stage 'under the counter filtration' system for all our drinking water. The GE model is easy to install and maintain, the filter cartriges last up to 6 months and the filtered water is free of harmful chemicals and other organic impurities.