Showing posts with label Lager. Show all posts
Showing posts with label Lager. Show all posts

Monday, January 21, 2013

Brewing The 2013 Hammerfest Marzen Lager

3B. Oktoberfest/Märzen: 

Rich German malt aroma of Vienna and or Munich malt a light to moderate toasted malt aroma is often present. Clean lager aroma with no fruity esters or diacetyl no hop aroma and Caramel aroma is inappropriate. Dark gold to deep orange-red color with bright clarity and solid off-white foam stand.

Grist varies, although German Vienna malt is often the backbone of the grain bill with some Munich malt, Pils malt and possibly some crystal malt. All malt should derive from the finest quality two-row barley. Noble hop varieties are most authentic. Somewhat alkaline water (up to 300 PPM), with significant carbonate content is welcome a decoction mash can help develop the rich malt profile.

OG: 1.050 – 1.057, IBUs: 20 – 28, FG: 1.012 – 1.016, SRM: 7 – 14, ABV: 4.8 – 5.7%


The preceding description was taken from the Beer Judge Certification Program description of the Oktoberfest/Marzen Lager style beer, the topic of this month's post and my first lager beer brewing project of 2013. The five gallon recipe I created calls for pitching 435 billion yeast cells of White Labs WLP820 - Oktoberfest/Märzen Lager Yeast™ at 56° F and fermenting at 50-54° F until a hydrometer sample reads 1.018, signalling the start of the diacetyl rest, then raising the temperature of the fermenting beer to 60° F over the course of three days.

Using a single infusion mash at 154° F for 60 minutes I included a small addition of Melanoidin malt to the grain bill to provide a big malty flavor and reddish color without having to do a complicated decoction mash schedule and extended boil on brewday. The other two grains used in the recipe are German Vienna malt, with roughly half as much German Munich malt, making up the backbone of the grist. The goal of this recipe is to produce as authentic tasting a Marzen Lager beer as I possibly can using my current brewing process. This beer should deliver all it's flavor and aroma from the recipe's malts, with no distractions caused by esters or hop additions to get in the way.

Oktoberfest/Marzen Lager
Size 5.50 gallons: Estimated IBU=27, SRM=11, OG=1.057, FG=1.014, ABV= 5.5%

For bittering I chose to use Czech Saaz hops and a smaller amount of Slovenia Styrian Gold in the kettle to offset the malt sweetness and compliment the malty biscuit aroma of the grains. I used my local tap water, which is not considered to be hard, filtered with a two stage G&E water filter before using it in the mash, I haven't had my tap water analyzed yet and I didn't add do anything else to modify the water profile to increase the hardness to 300 PPM. Well there we have it all the background information about the beer style the ingredients the brewing process and what to look for in the finished beer.

I picked up a really fresh vial of White Labs WLP820 - Oktoberfest/Märzen Lager Yeast™ at Princeton Homebrew and made a series of yeast starters over the course of a week to step up to the number of viable cells needed to ferment this beer. To prepare the starter wort I added 1 cup of extra light dme to 2 liters of filtered water then added a small pinch of yeast nutrient and boiled for 10 minutes. Once cooled and just prior to adding the vial of yeast I hit the starter wort with a burst of pure oxygen, dropped in the stir bar, poured in the yeast and sat the flask on a stirplate for 24 hours.

WLP-820 Lager Yeast Starter
 Once the krauzen had peaked and fallen I took the flask off the stirplate and set it in the refrigerator for a couple of days to help cold crash the yeast before decanting off the starter wort. I then repeated the steps to create a double batch of starter wort using the same proportions and split it equally between two 2 liter flasks. The first starter doubled my cell count to 200 billion viable cells, by splitting it in two and repeating the process using two stirplates and two starters at once I eventually ended up with the 400 billion viable cells needed to ferment this beer.

Cold Crashing 4 Liters Of Starter Wort
The yeast propagation process took a week to do and it had to be coordinated so it was completed in time for brewday when I would decant the starters, discarding the oxidized nasty tasting starter wort, and then pitch only the yeast. Since adding the decanting step to my yeast propagation process I have tasted a noticeable difference in the finished beer, enough of a difference that I decant all my starters now including the ones made using Ale yeast. Instead of making the starters the day before brewday now I make them 3 or 4 days before brewday, to allow the yeast enough time to settle out of the wort, it's a small adjustment to the brewing schedule and very easy to get used to.

60 Minute Full Rolling Boil
The grains were mashed for an hour followed by a two gallon vorlauf and a 45 minute lauter using a fly sparge with 174° F strike water until the kettle had 6.5 gallons of wort in it. The hop additions were put into the kettle at the start of the lauter and remained there until flameout to make room for the wort chiller that was used to drop the temperature down to 56° F prior to pitching the yeast. Near the end of the boil some WhirlFloc and yeast nutrient was added to the wort to help drop any proteins and cold break material out of suspension and provide the yeast with an energy supplement, both intended to reduce off flavors and promote a cleaner fermentation.

Wort Chiller And Pre-chiller Setup
During the course of the one hour vigorous boil a lot of Dimethyl Sulfide or DMS is boiled off, preventing the levels from building up too high and causing off flavors in the beer that smell like cooked or creamed corn. As the wort is cooled the DMS levels begin to rise again and if not cooled quickly enough the cooked corn off flavors start building up again in the wort and if left unchecked those off flavors will carry over to the finished beer. It's really important to cool the boiling wort down as quickly as possible after flameout to prevent the the formation of off flavors and also to greatly reduce the risk of infection. I did a simple calculation and found that cooling 5.5 gallons of 212° F wort down to 56° F requires removing around 6,800 BTUs of heat. My wort chiller with the pre-chiiler attached is capable of removing about 15,000 BTUs of heat and lowering the wort to 56° F in a little under 30 minutes. Even with the potential to remove such a high rate of BTUs from the wort the trick is to continuously stir the wort to keep it moving and in contact with the chiller coils or the insulating properties of the wort will greatly reduce the cooling efficiency.

1.057 Original Gravity Reading
Once the wort had been chilled and racked to the fermentor it was given a 60 second burst of pure oxygen to oxygenate the wort prior to pitching the WLP-820 starter yeast. The fermentation chamber had been precooled to 47° F a few hours before putting the fermentor inside it and a few hours later the temperature had leveled off and was held at a steady 50° F where it will stay for the majority of the fermentation. Nothing is better than bringing your wort up to a boil and then down to pitching temperature in as little time as possible, it's better for your finished beer and it also makes your brewday shorter.

Marzen Lager Samples Prior To Pitching Yeast
Based on several prior lager fermentations the primary fermentation and the diacetyl rest should be completed in about three weeks time and after that I'll rack the beer to a clean secondary and put it in the refrigerator and let the beer cold lager for 6 weeks so that the beer will be ready to drink in March 2013. Traditional Oktoberfest/Marzen Lager beers were brewed in the spring and fermented in caves over the long hot summer months to be enjoyed in the month of March, my approach is not historically accurate in that regard because I won't have the patience to wait 22 weeks before drinking this beer.

Hammerfest Marzen Lager
 This batch was carbonated and ready to start drinking the first week of March 2013 and it tasted amazingly good. I love the good clean malty flavors and aromas of a cleanly fermented Marzen as much as I love some of the hoppiest IPAs I brew. When the glass is poured and you're ready to take a sip you can smell the malt aroma and taste the clean malt flavors without any hint of yeast or other fruity esters. The carbonation, head retention and mouthfeel all worked together perfectly and the finish was pleasant, not at all bitter or cloying with hints of malt that made me want to drink another.

I have another 2.5 gallon corny keg of this beer sitting on 12 psi of Co2 in the refrigerator and it'll be ready to drink in about 5 days. I moved the beer from the fermentor to sanitized corny kegs after 3 weeks of fermentation at 50F and another week of cold crashing in the refrigerator at 36F. The corny kegs were filled with the 36F beer and then placed in the fermentation chamber at 50F for another 3 weeks to allow the beer time to condition. All these extra steps and extra time produced a really clean tasting beer that showcased the flavors and aromas of the malts used in the beer, this recipe is a keeper and I look forward to brewing it again then next time I decide to treat myself to a great tasting lager beer.

Sunday, May 1, 2011

Recipe 55 - Oktoberfest/Marzen Lager All Grain

This is my latest all grain Oktoberfest/Marzen lager recipe. I decided to brew a lager beer this time because of how well received my past lagers have been. Plus I've been looking at my empty fermentation chamber for the past few months and figured it was time to get some use out of it. The ingredients were bought at Princeton Homebrew, where I get all my brewing supplies. I sent Joe Bair, the owner of Princeton Homebrew, an email with the list of items I needed and he had them ready for me to pick up a few hours later.

CaraMunich, Melanoidin, Munich, Pilsener, Hallertauer And Saflager 23
Since brewing my original recipe this past January I've developed a new process for mashing my grains and have been using it for several months now. It involves calculating the recipe using 2 times the normal Mr. Beer size which for me is 2.13 gallons. I setup qBrew to use 4.25 gallons, instead of 2.13 gallons, then add my grain bill and hop schedules until I get the recipe close to the ABV, IBU and SRM range I'm targeting.

qBrew Grain Bill For 4.25 Gallon Batch Size
Since mashing takes an hour to an hour and a half I figured why not just double up on the grain bill and mash it all at once. This definitely shaves at least an hour off my brewing time while still giving me the same end results, two Mr. Beer fermenters filled with wort. My Screwy Mash Tun can hold 11 pounds of grains using a mash thickness of 1.25 to 1.5 and produces 4.25 gallons of 7% ABV beers with no issues.

qBrew Hop Schedule For 4.25 Gallon Size
For a 4.25 gallon batch I mash as usual and then lauter into 2 boil pots, alternating the filling frequently so that both pots get an equal share of the sugar rich wort as it leaves the mash tun. I lauter for 30 minutes and moving the fill tube between both pots gives me something to do while waiting for them to fill up.

Lauter And Alternating The Fill Between Both Pots
The hops schedule is then split into 2 so that each of the boil pots get the right amount. For example the qBrew recipe calls for 1.5 ounces boiled for 60 minutes, so I divided that by 2 and added .750 ounce to each boil pot. After mashing and filling the boil pots equally we can look at the rest of the boil as if we were doing 2 batches again.

Hop Additions Divided In Half To Add To 2 Boil Pots
I used qBrew's default 'Oktoberfest/Marzen' style guidelines as the basis for crunching this recipe's numbers. You can download the latest qBrew database below and use it to upgrade your current ingredient database. This latest ingredient database includes more yeast, fruits, extracts and other helpful entries then ever before.


 Click to download Screwy's latest qBrew database   



Recipe:
Click to download this recipe file for qBrew 
Size 4.25 gallons: Estimated IBU=34, SRM=13, OG=1.072, FG=1.018, ABV= 6.9%


1/2 pound CaraMunich
1/2 pound Melanoidin
5.0 pounds Munich (German)
5.0 pounds Pilsener (German)

1.5 ounce Hallertauer (Germany) pellet hops boiled for 60 minutes
0.75 ounce Hallertauer (Germany) pellet hops boiled for 30 minutes
1/8 tab WhirlFloc boiled for 9 minutes
0.75 ounce Hallertauer (Germany) pellet hops boiled for 7 minutes

Directions:
** Infusion mash at 156F for 60 minutes **

Soak mash tun in 12 quarts of 160F water for 20 minutes then dump to pre heat tun
Heat 20 quarts of filtered water to 170F
Pour 14 quarts of 170F water into mash tun
Mix in 11 pounds of crushed grain mix at 60F
Pour the remainder of the 170F water into mash tun filling to 4.5 gallon mark
Stir water and grain mixture and adjust to 156F and mash for 60 minutes
Sparge with 170F strike water to set mash bed to 168F
Lauter for 30 minutes adding 11.5 quarts of sweet wort to each boil pot

(Using 2 boil pots)
Boil for 60 minutes (8.5 quarts remaining for fermenter)
Add 3/4 ounce bittering hops at 60 minutes to flameout
Add 3/8 ounce flavoring hops at 30 minutes to flameout
Add 1/8 tab WhirlFloc at 9 minutes to flameout
Add 3/8 ounce aroma hops at 7 minutes to flameout
Pitched at 65F and fermented at 54F for 25 days
Raise to 60F over days 26 to 28 then rack to secondary fermenter
Cold lager for 4-6 weeks at 34F

Two 12 Quart Boil Pots And A Smaller Pot To Hold Extra Wort
 I keep an extra pot of wort boiling on a back burner and use it to replace wort lost in the boil pots during the 60 minute boil. I want to make sure I have at least 8.5 quarts of wort to put in each Mr. Beer fermenter before pitching my yeast. The extra wort ensures a full wort boil using the smaller 12 quart pots on the stovetop.

Nice Layer Of Krausen 12 Hours Later At 54F
This is my first time using Saflager 23 for this recipe so I expect it will behave a bit differently than the Saflager 34/70 I've used several times before. I'll look in on the fermentation every few days to see how it's progressing and I may have to make some adjustments to the fermentation times.

Here is a view inside the fermentation chamber on day 2 where the krausen has continued to thicken over the past 2 days. The temperature probe attached to the side of the fermenter wall is reading around 50F right now and I will adjust it upward to 52F where it will remain for the rest of the fermentation.

Day Two Fermentation At 50F
On May 28, after a 2 day diacetyl rest, I racked the lagers into clean secondaries and cold crashed them in the refrigerator at 36F where they''ll stay until I'm ready to keg them in time for the 4th of July weekend.

Oktoberfest Bottling Sample @ 38F
  On June 10th I bottled up the Oktoberfest Lager beer in 1 liter and some 12 ounce longnecks. The samples I tasted were spot on as for what I had expected. I plan on drinking these around the last week of June so they should have at least 14 days to carbonate in the bottles.

Condensation Formed On Bottles Filled With 40F Beer

The bottles have been carbing for about 7 full days and the 1 liter PET bottles are hard to squeeze now, a sure sign that the carbonation is taking place and working. Since it's only possible to check the carbonation level in glass bottles by actually popping one open I like bottling a least 1 PET bottles to use as a firmness gauge.

I brewed this recipe and allowed 4 weeks for primary fermentation at 54F, 3-4 more weeks for cold lagering at 36F and 3 more weeks at 62F for natural carbonation and conditioning. I'll let this brew fully carb up before chilling down and starting to drink them. I'll snap a few more pictures of the finished lager in a glass and provide my feedback trying my best to describe the taste.

Sunday, January 2, 2011

Brewing The Oktoberfest/Marzen All Grain Recipe

For the past several months I've been reading about brewing all grain recipes and little by little I managed to assemble what I felt were the key pieces of equipment needed to get started. Several months ago I built my first  wort cooler Screwy's Cooler and quickly realized how much of a time saver it would prove to be. The cooler design fits inside a standard 10 inch pot and easily attaches to a sink faucet. It uses cold tap water to quickly cool the boiling wort down to yeast pitching temperature in about 15-20 minutes for a 10.5 quart batch.

4.5 Pounds Of Crushed Mixed Grains Ready For Mashing

I used qBrew's default 'Oktoberfest/Marzen' style guidelines as the basis for crunching this recipe's numbers. You can download the latest qBrew database below and use it to upgrade your current ingredient database. This latest ingredient database includes more yeast, fruits, extracts and other helpful entries then ever before.

 Click to download Screwy's latest qBrew database   


Recipe:
Click to download this recipe file for qBrew 
Size 2.13 gallons: Estimated IBU=26, SRM=13, OG=1.058, FG=1.015, ABV=5.6%

1/4 pound CaraMunich
1/4 pound Melanoidin
2.0 pounds Munich (German)
2.0 pounds Pilsener (German)

3/4 ounce Hallertauer (Germany) pellet hops boiled for 60 minutes
1/4 ounce Hallertauer (Germany) pellet hops boiled for 20 minutes
1/8 tab WhirlFloc boiled for 9 minutes
1/4 ounce Hallertauer (Germany) pellet hops boiled for 7 minutes

11.5 grams Saflager W-34/70 (rehydrate using package directions before pitching)
Aerate, pitch at 65F and ferment at 54F for 25 days
Raise to 60F over days 26 to 28 then rack to secondary fermenter
Cold lager secondary fermenter for 4-6 weeks at 34F
Keg at 12psi for 5-7 days and serve at 34F

Directions:
** Infusion mash at 155F for 60 minutes **
Heat 7 quarts of filtered water to 170F
Soak mash tun in 8 quarts of 180F water for 20 minutes to pre heat it
Pour 3.5 quarts of 170F water into mash tun
Mix in 4.5 pounds of crushed grain mix at 60F
Pour 3.5 quarts the remainder of the 170F water into mash tun
Stir water and grain mixture and adjust to 155F and mash for 60 minutes
Sparge with 7 quarts 173F strike water to set mash bed to 168F
Lauter for 20 minutes adding 10.5 quarts of sweet wort to the boil pot

Boil for 60 minutes (8.5 quarts remaining for fermenter)
Add 3/4 ounce bittering hops at 60 minutes to flameout
Add 1/4 ounce flavoring hops at 20 minutes to flameout
Add 1/8 tab WhirlFloc at 9 minutes to flameout
Add 1/4 ounce aroma hops at 7 minutes to flameout

Remove from heat and remove hop sacks
Use Screwy's Cooler until wort temperature cools to 65F
Pitched at 65F and fermented at 54F for 25 days
Raise to 60F over days 26 to 28 then rack to secondary fermenter
Cold lager for 4-6 weeks at 34F
Keg at 12psi for 5-7 days and serve at 34F

In many ways the heart of the all grain brewing process is the mash tun so last month I built my first mash tun Screwy's Mash Tun and was now ready to give it a try. After some thought I decided to brew an Oktoberfest/Marzen as my first all grain recipe. I had already brewed this twice before using DME and steeping grains and fermenting it with Saflager 34/70 lager yeast and soon I would be able to compare the all grain version to the previous extract version.

Mash Tun Sanitized And Preheated To 180F

I started out by giving the mash tun a good rinse under hot water before emptying it and filling it with a gallon of Oxygen Brewery Wash mixed 2 scoops to the gallon of warm tap water. The 5 gallon size was easy to lift and shake with the cover secured so that the entire insides of the tun got coated with the cleaning solution. After letting the tun soak in the cleanser for 10-15 minutes I drained it out and added about a gallon of 180F water to the tun to preheat it before doing the actual mash, after 15 minutes I completely emptied the tun and prepared to do the mash.


I chose to use a mash thickness of 1.5 quarts of water per pound of grain and a mash temperature of 155F. I then multiplied 1.5 quarts of water by 4.5 pounds of grain and came up with 6.75 quarts, the total amount of strike water to initially add to the grains for mashing. Targeting the higher end of the recommended 147-155F temperature range for an infusion mash will produce a higher gravity wort and can be quickly cooled a few degrees by stirring if necessary. The strike water calculator indicated that the 170F temperature of the water added to the 60F grains would set the mash temperature to 155F.

Mash Thickness Set To 1.5 Quarts Per Pound

It's important to hit your target temperature as quickly as possible during the first few minutes of the mash. I poured in half the strike water and then added in all the grains then poured in the rest of the strike water and then stirred it up to remove any hot spots. Keep some extra hot water handy to add if the temperature is too low, if its too high stir the mash or add some filtered cold water until you hit the target temperature.

Rehydrate Dry Lager Yeast In 78F Boiled Water

Once my 155F grain bed temperature was stable I screwed on the lid of the mash tun and let it sit for 60 minutes. The tun is well insulated and it held the grain temperature consistently for the entire hour long mash. While waiting for the mash to complete I boiled a cup of water to use for rehydrating the dry yeast I was going to use. Once the water boiled I poured it into a sanitized bowl and allowed it to cool to 78F before sprinkling the entire contents of an 11 gram packet of Saflager 34/70 into it to soak for 15 minutes.

Three Cupfuls Of Wort Poured Back Into Tun

After the 60 minutes was up I collected 3 cupfuls of wort and then carefully poured them back into the mash tun to set the grain bed. I did this until the wort coming out of the mash tun was clear and free from grain particles. Once this was done I was ready to pour in my sparge water that I had heated to 173F while waiting for the mash to finish.



The strike water calculator showed that adding 173F batch sparge water to the 155F mash in the tun would raise the grain bed to 168F during the sparge. I needed to collect 10.5 quarts of wort into my boil pot for the full wort boil that would follow so I cracked open the ball valve to slowly let the wort into the boil pot and began slowly pouring the 173F water into the tun. In all it took about 20 minutes to slowly drain off the wort while pouring in the sparge water to keep the grain bed covered with around 2 inches of water.

Mr. Beer Keg Lid Prevents Disturbing The Grain Bed

The grain bed acts as a filter to keep our wort clear and free of debris so make sure it doesn't get disturbed during the batch sparging by pouring the water onto a flat sanitized lid and not directly onto the grains.

Collect 10.5 Quarts Of Wort Into The Boil Pot

You can control the flow rate of the wort leaving the mash tun by cracking open the ball valve just enough to allow the boil pot to be filled in 20 minutes, this gives the grains enough time during the sparging process.

Preparing For The Full wort Boil

Once the wort begins to boil I tossed in my bittering hop addition then 40 minutes later my flavor hop addition. The Whirlfloc went in with 10 minutes left to the boil and my aroma hops went in at 7 minutes.

The Last Few Seconds Of A 60 Minute Boil

I had already sanitized the wort cooler so once the boil is done I can just place it inside the boil pot in the sink and start cooling it down immediately. I'd also been stirring the rehydrated yeast every 5 minutes or so until the temperature was between 65-70F, this will also be the temperature I cool the wort down to prior to pitching the yeast.

212F To 65F In Less Than 20 Minutes And No Ice

While the wort was cooling down I took the fermenter apart and cleaned it with Oxygen Brewery Wash then reassembled it and let it soak for 10 minutes in the same cleanser solution.Once the wort reached 65F I poured it into the fermenter stirred it up really well to aerate it before pitching the 65F yeast and then stirring it up really good again before twisting on the fermenter lid.

Aerate The Wort, Pitch The Yeast And Aerate Again

The fermenter went into Screwy's Fermentation Chamber alongside the previous batches I had brewed earlier. The beer will ferment there for 28 days at a constant 54F before I transfer them to secondary fermenters which will then go into a 32F refrigerator to cold lager for 3-6 weeks. At the end of the cold lager period the beers will be ready to keg or bottle carbonate.

All 3 Fermenters Showed Krausen Within 12 Hours

Cleanup was a snap after draining the second running from the tun, I really wanted to make a light beer from them rather than toss them out but I'm out of fermenters, I dumped the grains into a large garbage bag for disposal.

Cleaning The Mash Tun Was Easy To Do Right In the Sink

The 5 gallon size tun fit inside my laundry sink for easy cleaning. I like to clean my equipment out really well before packing any of it away, it just makes my next brewday that much easier.

Braided Stainless Steel Grain Filter At Bottom Of Tun

Well that about wraps it up for my first all grain brewing experience. The mash tun worked perfectly and I got through 3 successful mashes without issue, no stuck sparges, leaks or other problems. For me the hardest part of the all grain brewing was building a good mash tun and wort cooler the rest was pretty easy. As with any type of brewing attention has to be paid to time and temperature.

I took a lot of notes as well since this was also the first time using my new boil pot for full wort boils and I used the strike water temperature calculator to figure out how much of what temperature water would be needed to heat the grain bed to the optimal temperatures.

Fermentation and Lagering Notes:

My 3 all grain batches have been fermenting in 3 separate Mr. Beer kegs at 54F for 16 days now.....Here is my finalized plan, which I will go forward with.... 

Primary Fermentation: Ferment at 54F for 26 days 

Diacetyl Rest: Let the temperature raise up to 60F over days 27 and 28 at a rate of less than 7 degrees per day. I read where temperature swings greater than 7 degrees per day may cause the yeast to drop out early.

Secondary Fermentation: I racked all 3 fermenters to secondaries at 60F before putting them in the refrigerator to 'lager' at 34F for 4-6 weeks.



After 28 Days Of Fermentation There Was A Lot Of Trub

Getting the beer off of the trub and into clean secondary fermenters will help keep the beer clean and clear and reduce the risk of introducing any off flavors. Lagering the beer at 34F for 4-6 weeks will allow the beer to smooth out while it conditions, the cold temperature also helps to drop out proteins to further reduce chill haze.

Oktoberfest/Marzen Lagering In Secondaries

Bottle Carbing: Take the secondaries from the 34F fridge to the 58F basement allowing 2 days for the temperature to adjust. Calculate the priming sugar Co2 volumes based on 58F then mixing that amount of sugar into some sterilized water and adding it and the beer to a bottling bucket to bottle and carb at 58F until fully carbed. 

This whole lagering business was started by monks who brewed their beer in March then stored it in mountains caves where the temperatures were cool all summer until they drank their fill in October... I'm not really sure how they warmed the caves to 65F for the diacetyl rest though...



No respectable home brewing post would ever be complete without the author's description of how the actual finished beer tasted. I have to say my Oktoberfest/Marzen lager beer recipe and brewing process tastes completely awesome! This is one recipe I will be brewing on the regular now, I've added it to several other of my recipes that I and my friends really enjoy drinking.


Oktoberfest/Marzen Lager Beer

I don't always drink a glass of beer for breakfast but I've been know to do just that whenever a recipe produces a really great tasting beer. It's not that I have a drinking problem or anything I'm just trying to ingrain the flavors, mouth feel and aromas in my memory for future reference, because I know the beer won't last much longer. 

The first thing you notice about this beer is it's clarity and bright golden color, with a distinct reddish hue and slight biscuit flavor compliments of the addition of melanoidin malt. Next comes that really smooth taste that you can only get from a well conditioned lager beer. The subtleties of the malts shine through without any of the fruity esters you would expect from an ale and the Hallertauer hops work perfectly to offset any malt sweetness with just the right amounts of bittering.





Friday, November 5, 2010

Classic Bohemian Pilsner - Wyeast 2007 - Pilsen Lager™

 My LHBS didn't have my first choice of yeast in stock so at the last minute I had to switch from using Wyeast 2124 to using Wyeast 2007 lager yeast.  The liquid yeast package was rated at 5 gallons so according to the OG of this recipe I knew it would be sufficient for my 2.13 gallon batch. I was using my new fermentation chamber for the very first time so I didn't know what to expect. The other 3 fermenters in the chamber had already shown some visible krausen after only 3-5 days but they were all using different lager yeasts types.


 Day 8: No Visible Krausen Floating On Top

  The two fermenters located in the lower half of the fermentation chamber had developed their krausen the fastest so after only 3-4 days I could see it already forming on the tops of both fermenters. I wasn't sure if it had something to do with the fact that they were further away from the 'frozen water bottle rack' and didn't have the really ice cold air falling directly on them.


 Day 9: Some Visible Krausen Floating On Top

  The two fermenters located at the top of the fermentation chamber were the closest to the frozen water bottles and they had the ice cold air falling directly down on them. This may have possibly explained why they took a few days longer to show any krausen on top of the beer.


Day 10: Even More Visible Krausen Floating On Top

By day 10 the two fermenters located on the top half were actively showing krausen while the two fermenters on the bottom now seemed to have slowed down on the levels of krausen. I guess if my plan was to prove whether or not the locations of the fermenters inside the chamber made a difference in the visible display of krausen during fermentation I should have used the same yeast type.

 Day 11: Still More Visible Krausen Floating On Top

 By now the 3 other yeasts have really slowed up on the amount of visible krausen that can be seen on the top of their fermentors.

After 28 days of fermentation at 50F I bottled all 4 batches and used my Bottle Priming Calculator to figure out how much priming sugar to use for each style.
Lager Styles And Fermentation Notes


Tuesday, October 26, 2010

Recipe #43 - Standard American Lager

 The recipe I'm about to describe is a Standard American Lager extract recipe that uses an Extra Light DME base and some Crystal 10L steeping grains for head retention. This style of beer has little to no malt aroma and a light floral or spicy hopping, in keeping with this style I have selected Willamette hops for bitterness, flavor and aroma.

 I used qBrew's default 'Standard American Lager' style guidelines to crunch the recipe's numbers. You can download the October 2010 qBrew database below and use it to upgrade your current ingredient database, this latest database includes more yeast, fruits, extracts and other useful entries then ever before.

 Click to download Screwy's latest qBrew database   



Recipe: Size 2.13 gallons: Estimated IBU=21, SRU=5, OG=1.046, FG=1.012, ABV=4.5%
1/2 pound Crystal 10L
2 pounds Muntons Extra Light DME
1/2 ounce Willamette pellet hops boiled for 30 minutes
1/4 ounce Willamette pellet hops boiled for 12 minutes
1/4 ounce Willamette pellet hops boiled for 5 minutes
Wyeast 2007 - Pilsen Lager™ (Activate 3 hours before pitching)
Pitched at 65F and fermented at 50F

Directions:
Steep grains at 150-170F for 30 minutes in 3.5 quarts filtered water
Boil 3.5 quarts of filtered water
Add 1/2 oz. hops and boil for 30 minutes
Add 1/4 oz. hops and boil for 12 minutes
Stir in 2 lbs. DME then boil for 10 minutes
Add 1/4 oz. hops and boil for 5 minutes
Place in ice bath until wort temperature cools to 65F
Add 4 quarts filtered water to Mr. Beer fermenter
Pour cooled wort into fermenter keg aerate and pitch yeast
Ferment at constant 50F temperature for 21 days

Sunday, October 24, 2010

Screwy's Fermentation Chamber

  Today the fermentation chamber is officially operational, here's the long awaited picture. Tomorrow I plan to start filling it up with Mr. Beer fermenters. I'm planning to brew 4 different lager beer recipes tomorrow and put all 4 into the fermentation chamber. I want to ferment all 4 at a constant 50F for the next 21 days or so.

Frozen Water Bottles Go In The Top And Fermenters In The Bottom

 The top, bottom, front, back and sides have 2 inch thick foam panels on the inside to keep the cold in. 

Fours Not A Crowd

 The cold air from the frozen water bottles on top circulates downward forcing the warmer air upward where the cycle repeats itself naturally.

Ice Tray Holds Up To 15 Frozen Bottles

Wednesday, October 13, 2010

Screwy's Fermentation Chamber

 I've been fermenting my ales in my home office, placing the Mr. Beer fermentation kegs on my desktop and using a window air conditioning unit to maintain 70F during the warmer months. After brewing 30 separate ale recipes and fermenting them this way I decided it was time to consider using a fermentation chamber to control the temperatures instead. 

The design criteria was simple the chamber had to hold up to 4 Mr. Beer kegs, since I usually brew multiple batches on the weekend. It also had to be very well insulated since it would be cooled using frozen water bottles. Oh and I almost forgot to mention that the wood used to construct the chamber had to be cut and assembled using only a small jigsaw, a 3/8" power hand drill and a few screw drivers.





Enjoying A Glass Of Chocolate Covered Cherries During Construction

  I sat down and spent a fair amount of time drawing out the dimensions and figuring out the construction method I would use. I wrote down the sizes of the pieces of plywood I would need for the top, bottom and sides and included some 1" x 3" pine boards to use for internal framing and constructing the chamber. 

Original Design Drawing

  Next it was off to Home Depot where I selected the 2 sheets of 1/2" plywood and had them cut into the size pieces I needed, which worked out really good for me since my only power saw was a small jigsaw and not very good for cutting large pieces of plywood. To hold the chamber together I used 1 1/2" and 3" sheet rock screws, the kind used for drilling into metal studs, after coating the joints first with wood glue.


 The Inside Is Lined With 2 Inch Thick Foam Board

 I lined the inside of the chamber with 2 inches of heavy duty foil backed foam insulation and sealed the joints with foil backed tape and duct tape to assure an airtight seal. The plan was to use frozen water bottles placed at the top of the chamber, since the cold air would naturally sink to the bottom and force the warmer air back up to the top to be cooled.


Plastic Storage Container From Walmart Collects Condensation


  After assembling the chamber, doors, hardware and insulation I filled in any imperfections caused by the screws with wood filler and sanded the surfaces smooth. The finishing touches are still waiting to be completed, I plan to give the chamber a fast coat of urethane stain to protect the outside from spills. Although this piece of furniture won't be making it's way to my living room anytime soon, it will provide me with years or worry free service and a lot of lager beers.

The Chamber Holds Up To 4 Mr. Beer Kegs

  The total cost of the project so far is under $200.00 and 4 or 5 trips to Home Depot, not to mention my time spent designing, building and finishing the chamber. The project was fun though and it gave me something to do while my current 3 batches of beer were fermenting away. The next time I post an update on Screwy's Fermentation Chamber I hope to show the finished product with 8 plus gallons of lager beer fermenting away.

Screwy's Fermentation Chamber In Progress

When I designed the fermentation chamber I had kept in mind that someday I would be using carboys or ale pails instead of the Mr. Beer little brown kegs. Today I mostly use 6.5 gallon white plastic fermentation pails for my 5 gallon batches. The chamber's inside dimensions allow it to hold two of these ale pails at a time with room to spare for the cool air to circulate.

At the time of this posting the chamber will be two years old in a couple of months and it still looks and works like the day I finished building it. I find myself using it more now than I ever imagined I would back then when I first thought of building one instead of buying a refrigerator and Johnson controller setup. Of course I did buy a small refrigerator for my beer, kegs and to make the frozen water bottles so now I have the best of both worlds.